So, we knit with a change of color and resolve any issues that arise. Here and further we consider colored knitting of straight flat fabric with single crochets.

Solving the issue with the ends (tails) of threads at the beginning and end of knitting

Changing thread when crocheting patterns

When making jacquard patterns, the non-working thread is pulled along the wrong side of no more than 3 loops. If the section is longer, then it needs to be knitted from a separate ball. The advantage of this method is that the knitting does not tighten and looks neat on the wrong side. You can also avoid long hanging loops.
	Before changing the thread, leave the last two loops on the hook and place the thread behind the work. Pick up the thread of the second color with a hook from behind and knit both loops with it.
	Work a double crochet with a thread of the second color, the main thread hangs from the wrong side.
	Before the next yarn over, cross both working threads.

	Before changing the thread, leave the last two loops on the hook and put the thread before working. Pick up the thread of the second color with a crochet hook and knit both loops with it.
	Yarn over one time, thread the main color under the hook.
	Insert the hook into the next loop, pick up the working thread and pull through one loop. The main color thread is placed in front of the work.
	Crochet double crochet as usual.

Changing the thread during the knitting process can be done both when crocheting and knitting - the technology here is not very different. The simplest option is to change the thread at the end of the knitted row. Knit a row and into the last loop, before turning the fabric and starting the next row, thread a new thread of a different color.

Sleight of hand, and no fraud. The easiest of all methods. NO points or steps!

1.

2.


We knit the last stitch in the row. Remove the loop from the hook. Insert the hook into the top of the lifting chain, and then into the left loop. And we knit them in one fell swoop with a thread of a different color. Those. it turns out to be a regular connecting post, but the loops are swapped.
This method allows you to knit without tearing the thread. But ideally it only works on RLS. This way you can knit in one color - the seam also looks better. On CH - the lifting chain slightly turns away from knitting, but still the result is not bad.

I have another good option so as not to tear off the thread - but the effect is the same. You complete the SS row. Pull out a larger loop and pull the ball through it, tighten it until it stops. Those. you no longer have a free loop. With a new thread, start the next row with a lifting chain. The seam on multi-colored rows will be without unnecessary inclusions. But dissolving such a thing is problematic.

If you still knit as usual, you need to pull the last stitch before the connecting stitch as tightly as possible, a little will help.

You have probably already encountered, or will continue to encounter, the problem that when knitting a piece in the round with two colors, the line where the colors meet does not turn out straight, but twists in a spiral (moves to the right). How to correctly add a new color?

Let's start by introducing a new color.
We introduce the new color not from the column indicated in the diagram or in the description, but in the previous column, that is, knitting the last yarn over of the column with a new color (as shown in the photo below).

2.

We draw the first thread on the wrong side, intertwining with the second or simply pulling it loosely (sometimes dark threads can show through through light threads, then it is better to use the second method). We return the first thread in the same way as we introduced the second.

5.

6.

7.

To ensure that the line where the colors meet is even and does not move anywhere, you should knit the last stitch of the first color not into a loop, but into the single crochet of the previous row (as shown in the photo below), and also knit the first stitch of the second color.

10.

11.

12.

If the toy is small, you can knit it completely in a column, as the Japanese do.

14.

Multicolor knitting is knitting with two or more colors of yarn. According to the method of execution, we can distinguish jacquard knitting and, which are usually called lazy or false jacquards. Classic ones are made using stockinette stitch, changing yarn colors and pulling threads on the wrong side of the work. Another type of jacquard knitting, which came from Sweden, is bohus knitting, performed with both knit and purl loops (on the front side). Pulling the threads on the wrong side narrows the work, so you need to especially carefully monitor the tension of these threads, do not tighten them, otherwise the jacquard pattern will not turn out beautiful. The photo shows mittens knitted with a jacquard pattern (click on the picture if you want to see the pattern).

The false jacquard technique is that each row is knitted with yarn of the same color; there is no color change in the row. The pattern is formed, as a rule, due to . The false jacquard technique is easier to perform, does not require much experience, and such patterns can be recommended to beginner knitters.

But no matter what technique you use, in multi-color knitting there is always a need to add yarn of a different color at the beginning or during knitting of a row.

Let's look at some techniques that may be useful to you when knitting multicolors.

Attaching a thread at the beginning of a row

The thread of the new color is grabbed together with the thread of the previous color and the two threads are knitted together in the edge loop of the row that precedes the row in which the yarn of the new color is introduced (in this case, burgundy).

Attaching a new color of yarn at the beginning of the row, first stage

The work is turned over, the edge loop is removed as usual, and then the row is knitted with yarn of a new color. The remaining “tail” is crocheted into the edge loops.

Attaching a new color of yarn at the beginning of the row, second stage

Changing yarn color at the beginning of a row

Sometimes it becomes necessary to frequently change colors at the beginning of a row when knitting two colors of yarn, especially when knitting lazy jacquards. In this case, the following method is suitable for decorating the side edge of the fabric: the edge loops are knitted with yarn of both colors, then the work is turned over, and the next row is knitted in the desired color. The result is a neat, albeit thicker, side edge of the canvas.

Changing yarn color at the beginning of the row: side edge

Another way to change colors at the beginning of a row- knit the last stitch of the knit row behind the front wall, turn the work over, and do not remove the edge loop, as usual, and also knit the knit stitch, but in a different color, and the working thread should go from above.

Changing the thread at the beginning of the row to form a decorative edge

As a result, we get a beautiful decorative edge that is suitable for knitting scarves. But in order for the tension of the fabric along the side edges of the part to be the same, at the other end of the row the first edge loop also needs to be knitted, and not removed.

If there is a large distance between the rows in which the color change occurs, then it is better to pull the thread of the non-working color through the broaches between the penultimate and last (edge) loop.

Connecting the ends of the threads

Often there is a need to join the ends of threads, and not only when knitting in multiple colors, but also simply when you need to start from a new ball. In this case, you can tie the ends with a special knot, when the ends of the threads are twisted twice at the second stage of tying the knot (see more details). Such a knot does not untie and turns out small:

Using the same knot, you can not only tie the ends of the yarn, but also tie yarn of a different color in a row, if you need to introduce a new color when jacquard knitting.

Attaching a new color thread to a row

You can join the threads without a knot by twisting the ends. In this case, several loops are knitted in two threads, so the yarn should be thin enough so that these loops do not stand out too much against the general background.

Securing long strands of thread in classic jacquards

When knitting classic jacquards, sometimes too long broaches are formed, which create inconvenience when wearing the finished product. If there are more than 4 loops between color changes, the broaches are intertwined with the working thread.

Interweaving the drawing thread with the working thread when working from the front side

Changing colors in jacquard knitting requires competent changing thread when crocheting. This is not so difficult to do, but you need to know some nuances.

Let's look at several stages of colored knitting of a flat fabric using the single crochet pattern.

Flat knit with white and black pattern

The product is knitted according to the pattern “4 white single crochets, 5-6 black single crochets.” When knitting, you should remember that in the last loops of the previous column the color changes. It goes like this. First, three white stitches are knitted, the 4th is knitted from a loop (there should be 2 loops on the hook), the black thread is picked up with a hook. The remaining 2 loops on the hook are knitted with black thread. Thus, the black thread is pulled through 2 loops at once.

After this, you need to knit 5-6 black loops and repeat the same steps as with the 4th white one. After a row of fabric has been knitted, you can see that there will be no displacement of colors during this knitting, because the last loops will be the “tops” of the next ones (for example, the 4th in relation to the 5th).

Securing the ends of the threads

When changing threads frequently when crocheting in multicolor patterns, the question often arises when crocheting how best to secure the ends of the threads. The easiest way is to secure the threads on the wrong side of the product.

At the same time, most knitters do not tie the ends of colored threads to each other at all. When the need for a new color arises, the thread is simply picked up with a hook. The short end is held with a finger and laid along the already knitted row, i.e., knitted into the fabric itself. This method allows you to make the back of the product more professional, avoiding unnecessary knots and tubercles.

Although the method of knitting the ends of the thread is not suitable for every yarn. If the threads are very slippery, it is better to use knots to prevent the ends from accidentally popping out. In the case when the product is knitted from wool, bulky cotton, wool mixture or acrylic, you can use any method of securing the ends. If the ends become knotted, they can be cauterized or glued.

Alternating working and unused threads

In the process of knitting, knitters are faced with the fact that one of the threads is not used during the knitting process. To prevent it from sagging, it also needs to be hidden. To do this, use the same method as the one used to secure the ends of the threads. The “resting” thread is laid along the row that is currently being knitted. New posts are made around this thread. If necessary, the threads are changed.

You can use one or more balls. It all depends on the preference of the knitter. Many people prefer to use new balls so that a thread of a different color does not show through. In addition, if the thread is pulled through the product, the fabric becomes denser. To avoid this, it is better to use new balls every time you change colors.

Sometimes it is not even a ball that is taken, but a thread of the required length is torn off. In this case, tangling of threads can be avoided. Separate threads are used to knit small parts in the design of the product.

The methods for replacing threads in jacquard crochet proposed in this article are not exhaustive. Each knitter may have her own methods for changing thread. But even these methods can significantly help both beginners and professional knitters to knit a beautiful and high-quality product.

Changing a thread of a different color is necessary when making paintings according to embroidery patterns, as well as in models of children's and women's clothing, and other home decor products.

Changing thread at the end of the row

We do not add a double crochet to the last loop of the row, i.e. We knit it until there are 2 loops left on the hook.

We pick up a thread of a new color and knit the remaining 2 loops with it.

Changing thread in the middle of a row

When knitting various dense patterns, sometimes you have to change the thread in the middle of the row.

Similarly, we knit a double crochet until the last stage, until there are 2 loops left on the hook.

We pick up a thread of a different color and knit these 2 loops, then continue knitting with a thread of a different color.

This way you avoid color shifts when crocheting.

When knitting jacquard patterns, the non-working thread is usually pulled along the row, at a distance of 3-4 loops, and after changing the color, the working and unused thread are simply swapped.

Using a green thread, we knit a double crochet until the last stage, until there are 2 loops left on the hook.

We pick up the orange thread and knit 2 loops with it

We make a yarn over (we place the green thread along the row), insert the hook into the loop, grab the thread and pull out a new loop (as you can see, the green thread should be inside the stitches), knit a double crochet and then continue knitting, changing the colors of the thread according to your pattern.

This page is found by queries:

• alternating yarn colors when crocheting
• replacing thread when crocheting
• how to alternate threads when crocheting
• how to alternate threads when crocheting

When knitting many amigurumi toys, you need to change the color of the thread, and when you usually tie a new thread, the knitting does not look very beautiful; on the new row in the new color, half-loops of the “old” color are visible. This master class shows 2 ways to change colors when knitting toys so that the transition looks clean and neat. The first method demonstrates changing the thread when knitting in a spiral, and the second - when knitting in closed rows.

Method 1: spiral knitting

We knit to the place where you need to change the color. Now insert the hook into the loop of the next stitch, grab the thread of the old color and pull it out. You have two loops of the old color on your hook.

Now we grab the new thread with the hook and pull it through the loops on the hook.

Insert the hook into the next loop, grab the thread, pull it out and pull it through the loop on the hook (it turns out to be a half-column).

video.

Method 2: knitting in closed circular rows

Having completed a row in the old color, do not close it with a connecting loop.

Remove the loop from the hook and insert the empty hook into the loop in which you would end the row.

Now take the loop you removed from the hook and place it on the hook from front to back.

Now put a thread of a new color on the hook and pull it out. Make a chain lifting loop and then knit the row as usual.

For greater clarity, you can look